-
+86-(0)755-86632700
-
international@hanslaser.com
- معلومات عناالمقدمةنظرة عامة على النباتاتمعالمآثار أقدام عالميةالعلامات التجارية للعملاء
- منتجاتسلسلة آلة وسم الليزرسلسلة آلة لحام الليزرسلسلة آلة القطع بالليزرطابعات ثلاثية الأبعادالتشغيل الآليتفتيشCNCروبوت صناعي
- تطبيقاتالإلكترونية وأشباه الموصلاتالأجهزة الميكانيكيةصناعة ثنائي الفينيل متعدد الكلورطاقة جديدةصناعة التغليفصفيحة معدنيةصناعة السياراتالآخرين
- الخدماتتركيب الجهازفيديو المنتجاختبار بسيطبعد البيع
- أخبارخبر صحفىصناعة المعرفةالأنشطة السنويةمركز الفيديو
-
اتصل
مركز هان لتكنولوجيا الليزر ، شينان
شارع رقم 9988 ، منطقة نانشان ، شنتشن ،
مقاطعة قوانغدونغ ، الصين.
الرمز البريدي: 518057
هاتف: +86 - (0) 755 - 86632594
البريد الإلكتروني: international.hanslaser@gmail.com
مجموعة هانز لتكنولوجيا صناعة الليزر المحدودة ، حقوق الطبع والنشر © جوانجدونج ICP رقم 05013795
SP0201-CO2-30
مسار مزدوج علوى وسفلي مصمم ومحكم الاغلاق
دقة الحركة الخطية والفتيل
يتم التحكم في منضدة العمل بواسطة نظام تحكم متعدد المحاور ؛ عوامل الحركة يمكن برمجتها بصريا يمكن تخزين المنتجات منزوعة الاسلاك المختلفة
Application:
Remove the insulating layer or enamel coat of the wires.
Working principle:
Laser stripping is achieved by applying high power density energy generated by laser focusing. The data signal cables used in general microelectronic products have multiple protective layers on the outside of the cable, which are roughly divided into external plastic insulation layers, metal shielding layers, nylon insulation protection layers and the innermost core. Conventional tools cannot effectively peel off, the quality is difficult to control, the depth of cut is not enough, the peeling is not clean, the depth of cut is too large, the copper core is cut off, and the multilayer wire cannot be peeled off. Laser stripping machine can solve these problems.
CO2 laser can strip the non-metal insulating layer, external Insulation rubber layer and Nylon insulation protection layer.
Specification:
Machine model: |
SP0201-CO2-30/SP0402-CO2-30 |
Laser power: |
CO2:30W |
Laser wavelength: |
10.6 um |
Cutting wire diameter: |
0.1- 2mm |
Cutting speed: |
Depends on materials, max to 300mm/S |
Lens adjustable range: |
±8mm |
Cutting process: |
Straight line, I-shaped |
Max cutting speed: |
300mm/s |
Position system: |
Relay on fixture |
Worktable position accuracy: |
≤± 0.05mm |
Worktable repeated position accuracy: |
≤± 0.02mm |
Control system: |
Multi-axis control system |
Cutting area(X×Y): |
200mm×100mm (optional) /400mm×200mm |
Machine size |
1350*630*500 |